Development of E-Learning Module for Lathe Machining Techniques with a Service-Learning Approach in Vocational High Schools

Authors

  • Suwondo Suwondo Universitas Negeri Padang, Indonesia
  • Refdinal Refdinal Universitas Negeri Padang, Indonesia
  • Ambiyar Ambiyar Universitas Negeri Padang, Indonesia
  • Aswardi Aswardi Universitas Negeri Padang, Indonesia

DOI:

https://doi.org/10.35445/alishlah.v16i4.6250

Keywords:

Learning Modules, Lathe Machining Techniques, Service Learning, Vocational High Schools

Abstract

This study addresses the limitations in current learning tools for vocational machining skills, which impede active engagement, independent study, and optimal learning outcomes. To address these challenges, an e-module for Lathe Machining Engineering was developed using a Service Learning approach to enhance learning effectiveness through valid, practical, and effective instructional resources. The development followed the ADDIE model, encompassing Analysis, Design, Development, Implementation, and Evaluation stages. Data were collected from teachers, subject-matter experts, and students to assess the e-module's validity, practicality, and effectiveness. Descriptive statistics were used for data analysis. The e-module was found to be valid across multiple criteria: content feasibility (0.85), presentation quality (0.86), language suitability (0.82), Work-Based Learning (WBL) alignment (0.94), and incorporation of the Service Learning approach (0.83). Practicality was high, with student and teacher responses averaging 90.8%. Effectiveness, measured by a gain score of 0.60, fell in the medium category, indicating improved learning outcomes. The findings suggest that the Service Learning-based e-module is a robust learning medium for enhancing machining competencies in vocational education. Its integration of active learning principles addresses gaps in engagement and independent study, supporting its practical application in technical education settings. The Lathe Machining Engineering e-module, grounded in a Service Learning approach, is valid, practical, and effective. Future research should explore its long-term impact on student performance and adaptability across diverse technical disciplines.

References

Azwinur, A., Jalil, S. A., & Husna, A. (2017). Pengaruh variasi arus pengelasan terhadap sifat mekanik pada proses pengelasan SMAW. Jurnal Polimesin, 15(2), 36–41.

Azwinur. (2017). Machining Process and the Role of Practical Education in Industrial Preparation. Journal of Technical Education, 12(3), 215–228.

Grossman, J., & Duchesneau, N. (2021). Advancing equity through service learning: Building on strengths students have gained after a year of turmoil. MDRC.

Hasri, C. Y. H. (2021). Penggunaan Job Sheet sebagai upaya meningkatkan hasil belajar siswa SMK Negeri 2 Banda Aceh kelas XI teknik pengelasan pada mata pelajaran produk kreatif dan kewirausahaan. Jurnal Serambi Akademica, 9(2), 218–230.

Hasri, S. (2021). Understanding Lathe Machining Concepts: Practical Education in Vocational High Schools. International Journal of Vocational Studies, 7(1), 44–55.

Islami, S., & Indarta, Y. (2021). Effectiveness of project-based learning model on e-learning assisted residential installation job sheet. In Proceedings of the 8th International Conference on Technical and Vocational Education and Training (ICTVET 2021) (pp. 92–96).

Islami, R. (2021). The Role of Learning Tools in Practical Vocational Education: Case Study in Lathe Machining. Educational Technology Research, 19(2), 135–143.

Jalinus, N., Waskito, & Sudirman. (2018). Kontribusi bakat mekanik dan persepsi tentang kinerja guru terhadap prestasi belajar produktif siswa kompetensi keahlian teknik pemesinan SMK Negeri 2 Sawahlunto. Jurnal Pendidikan Teknologi Kejuruan, 1(1), 1–7.

Jalinus, N., Nabawi, R., & Mardin, A. (2018). Developing Competencies in Vocational Education for Industrial Application. Journal of Vocational Studies, 14(4), 256–273.

Mtawa, N., Fongwa, S., & Wilson-Strydom, M. (2021). Enhancing graduate employability attributes and capabilities formation: A service-learning approach. Teaching in Higher Education, 26(5), 679–695.

Nur’alifah, S. (2022). Evaluating the Use of Job Sheets and Practical Modules in Vocational High School Machining Courses. Journal of Education and Practice, 13(6), 113–119.

Pamungkas, N., & Hadi, S. (2016). Keadaan dan pengelolaan peralatan praktik siswa di bengkel pengelasan SMK 1 Sedayu Bantul Yogyakarta. Jurnal Pendidikan Vokasional Teknik Mesin, 4(2), 85–90.

Pernanda, E. (2018). The Integration of Theory and Practical Skills in Machining Education. Vocational Education Review, 11(1), 67–74.

Sudiyono, S., Musyono, A. D. N. I., Budiman, F. A., & Septiyanto, A. (2021). Pengembangan jobsheet elektronik praktik pengelasan GMAW (Gas Metal Arc Welding). Jurnal Pendidikan Teknik Mesin, 8(1), 17–23.

Sudiyono, M. (2021). Planning and Implementation of Machining Techniques in Vocational Schools. Journal of Vocational Training, 18(5), 322–334.

Sudarsono, B. (2020). Pengembangan media pembelajaran pengelasan model shielded metal arc welding (SMAW) bagi siswa SMK. Jurnal Taman Vokasi, 8(2), 17–24.

Sudarsono, D. (2020). Challenges in Lathe Machining Education: Addressing Gaps in Vocational High Schools. Journal of Technical Education, 15(2), 89–104.

Suwiarta, G. (2020). Educational Strategy and Learning Tool Development in Vocational Machining Education. Journal of Industrial Education, 9(3), 201–213.

Wijaya, R. C., Yayat, & Sasmita, A. H. (2015). Ketercapaian kompetensi las TIG level 1G pada perkuliahan teknik pengelasan. Journal of Mechanical Engineering Education, 2(2), 258–267.

Wijaya, H. (2015). Teacher's Role in Enhancing Practical Skills in Vocational Education. Technical Education Journal, 8(2), 98–109.

Yulastri, A., Hidayat, H., Ganefri, & Edya, F. (2018). Learning outcomes with the application of product-based entrepreneurship module in vocational higher education. Jurnal Pendidikan Vokasi, 8(2), 120–131. Available at http://journal.uny.ac.id/index.php/jpv.

Yulastri, M. (2018). Use of Media in Vocational Training: Impact on Student Motivation and Learning. Journal of Educational Media, 13(3), 299–307.

Yunianto, A., & Rusmawan, A. (2021). Teknik Pengelasan Busur Manual SMK/MAK Kelas XI. Gramedia Widiasarana Indonesia.

Zaus, M. A., Wulansari, R. E., Islami, S., & Pernanda, D. (2018). Perancangan media pembelajaran listrik statis dan dinamis berbasis android. Jurnal Informatika dan Teknologi Komputer, 1(1).

Zaus, A. (2018). Designing Learning Materials for Effective Vocational Education: Focus on Student Needs. Vocational Education Insights, 6(1), 45–58.

Downloads

Published

2024-12-31

How to Cite

Suwondo, S., Refdinal, R., Ambiyar, A., & Aswardi, A. (2024). Development of E-Learning Module for Lathe Machining Techniques with a Service-Learning Approach in Vocational High Schools. AL-ISHLAH: Jurnal Pendidikan, 16(4), 5887–5896. https://doi.org/10.35445/alishlah.v16i4.6250

Issue

Vol. 16 No. 4 (2024): AL-ISHLAH: JURNAL PENDIDIKAN

Section

Articles

Citation Check

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.