Blended Learning Model Based on Massive Open Online Courses (MOOCs) Assisted by Augmented Reality (BMA) Model as the Electronic Learning Media in the Pandemic Covid-19

Authors

  • Eko Risdianto Universitas Bengkulu, Indonesia http://orcid.org/0000-0002-5950-2238
  • Wachidi Wachidi Universitas Bengkulu, Indonesia
  • Riyanto Riyanto Universitas Bengkulu, Indonesia
  • Alexon Alexon Universitas Bengkulu, Indonesia
  • Irwan Fathurrochman Institut Agama Islam Negeri (IAIN) Curup, Indonesia http://orcid.org/0000-0002-8878-1387
  • Kusen Kusen Institut Agama Islam Negeri (IAIN) Curup, Indonesia

DOI:

https://doi.org/10.35445/alishlah.v13i1.470

Keywords:

MOOCs, E-Learning, Augmented Reality, Pandemic Covid-19

Abstract

This study aims to analyze educators' responses to implementing the blended learning model based on MOOCs assisted by augmented reality or the so-called BMA model. This BMA model is applied to the learning process using the MOOCs system that has been developed with augmented reality assistance in the midst of the COVID-19 pandemic. To determine the response of prospective educators in the study, data collection techniques were carried out using a questionnaire given to 47 students. This questionnaire consists of 17 question items with 4 Likert scales. The data analysis technique used qualitative, quantitative data analysis. To test the quality of the questionnaire given, data analysis was used using the Rasch model and the winsteps application. Based on the research results, it was found that the instrument data used were valid and reliable. The results of student responses obtained are in very good criteria. This is reinforced by the results of the validity calculation in the rasch analysis which was carried out which stated that 17 items were declared valid and no items were issued. In addition, the value of the calculation of data reliability using the alpha cronbach method with a score of 0.91 is higher than the r table value for α = 0.05 0.2876. Thus it can be said that the data used is reliable and prospective educators respond very well to the use of this BMA model in the implementation of the learning process through the MOOCs system during the Covid-19 pandemic. This is reinforced by the results of the validity calculation in the rasch analysis which was carried out which stated that 17 items were declared valid and no items were issued. In addition, the value of the calculation of data reliability using the alpha cronbach method with a score of 0.91 is higher than the r table value for α = 0.05 0.2876. Thus it can be said that the data used is reliable and prospective educators respond very well to the use of this BMA model in the implementation of the learning process through the MOOCs system during the Covid-19 pandemic. This is reinforced by the results of the validity calculation in the Rasch analysis, which was carried out, which stated that 17 items were declared valid and no items were issued. In addition, the value of the calculation of data reliability using the alpha cronbach method with a score of 0.91 is higher than the r table value for α = 0.05 0.2876. Thus, the data used is reliable, and prospective educators respond very well to the use of the BMA model in the implementation of the learning process through the MOOCs system during the Covid-19 pandemic.

References

Busri, E., Zulirfan, Z., & Fakhruddin, F. (2019). The Development of MOOC Media to Increase Recall Memory Skill on Physics at Vocational High School. Journal of Physics: Conference Series, 1(1), 1–4. https://doi.org/10.1088/1742-6596/1351/1/012017

Emigawaty. (2017). Perancangan Arsitektur Dan Purwarupa Model Pembelajaran Massive Open Online Course (MOOCs) Di Perguruan Tinggi Menggunakan Layanan Mobile. Jurnal Ilmiah DASI, 18(1), 25–30.

Fandianta, Sanjaya, G. Y., & Widyandana. (2013). Meningkatkan Pengetahuan Mahasiswa dengan Memberikan Fleksibilitas Belajar Mengajar melalui Metode Blended Learning. Jurnal Pendidikan Kedokteran Indonesia, 2(2), 1–8.

Fathurrochman, I., Danim, S., Anwar AB, S., & Kurniah, N. (2021). The School Principals’ Role in Education Management at the Regional Level: An Analysis of Educational Policy in the Industrial Revolution 4.0. Advances in Social Science, Education and Humanities Research, (532), 237–242.

Fathurrochman, I., Danim, S., Anwar AB, S., Kurniah, N., & Ristianti, D. H. (2021). Theoretical Review of the Implementation Islamic Boarding School Curriculum Management in Indonesia. International Journal of Education Research and Development (IJERD), 1(1), 1–15.

Husna, J. (2019). Implementasi MOOCs di Pendidikan Ilmu Perpustakaan dan Informasi (Sebuah Peluang dan Tantangan di Indonesia). Anuva: Jurnal Kajian Budaya, Perpustakaan, Dan Informasi, 3(3), 247–256.

Ismail, M. E., Hashim, S., Ismail, I. M., Ismail, A., Daud, K. A. M., & Khairudin, M. (2018). Penggunaan Massive Open Online Course (Mooc) Dalam Kalangan Pelajar Vokasional. Journal of Nusantara Studies, 3(1), 30–41.

Khoiroh, N., Munoto, & Anifah, L. (2017). Pengaruh Model Pembelajaran Blended Learning Dan Motivasi Belajar Terhadap Hasil Belajar Siswa. Jurnal Penelitian Ilmu Pendidikan, 10(2), 97–110.

Nastiti, F., & Abdu, A. (2020). Kajian: Kesiapan Pendidikan Indonesia Menghadapi Era Society 5.0. Edcomtech Jurnal Kajian Teknologi Pendidikan, 5(1), 61–66. https://doi.org/10.17977/um039v5i12020p061

Nilasari, S. (2019). Pendidikan Di Era Revolusi Industri 5.0 Terhadap Disiplin Kerja Guru. Prosiding Seminar Nasional Pendidikan PPs Universitas PGRI Palembang, 2, 999–1015.

Nuryanti, S., Masykuri, M., & Susilowati, E. (2018). Analisis ITEMAN dan Model Rasch pada pengembangan instrumen kemampuan berpikir kritis peserta didik sekolah menengah kejuruan. Jurnal Inovasi Pendidikan, 4(2), 224–233.

Oey-Gardiner, M., Rahayu, S. I., Abdullah, M. A., Effendi, S., Darma, Y., Dartanto, T., & Aruan, C. D. (2017). Era Disrupsi: Peluang Dan Tantangan Pendidikan Tinggi Indonesia (2nd ed.; D. Dhakidae, ed.). Jakarta: Akademi Ilmu Pengetahuan Indonesia.

Oktaria, S. D., Budiningsih, A., & Risdianto, E. (2018). Model Blended Learning Berbasis Moodle. In Halaman Moeka Publishing. Jakarta Barat.

Pragestu, S., Sujiani, H., & Negara, A. B. P. (2015). Implementasi Augmented Reality dengan Memanfaatkan GPS Based Tracking pada Sistem. Jurnal Edukasi Dan Penelitian Informatika (JEPIN), 1(2), 122–127.

Praherdhiono, H., Adi, E. P., & Prihatmoko, Y. (2018). Konstruksi Demokrasi Belajar Berbasis Kehidupan Pada Implementasi LMS Dan MOOC. Edcomtech, 3(1), 21–28.

Prayitno, E., & Masduki, L. R. (2017). Pengembangan Media Blended Learning Dengan Model Flipped Classroom Pada Mata Kuliah Pendidikan Matematika Ii. JIPMat, 1(2), 121–126. https://doi.org/10.26877/jipmat.v1i2.1238

Priono, A. I., Purnawan, P., & Komaro, M. (2018). Pengaruh Penerapan Model Pembelajaran Blended Learning Terhadap Hasil Belajar Menggambar 2 Dimensi Menggunakan Computer Aided Design. Journal of Mechanical Engineering Education, 5(2), 129–140. https://doi.org/10.17509/jmee.v5i2.15179

Putrawangsa, S., & Hasanah, U. (2018). Integrasi Teknologi Digital Dalam Pembelajaran Di Era Industri 4.0 Kajian dari Perspektif Pembelajaran Matematika. Jurnal Tatsqif, 16(1), 42–54. https://doi.org/10.20414/jtq.v16i1.203

Rafiq, K. R. M., Hashim, H., Yunus, M. M., & Pazilah, F. N. (2019). Developing a MOOC for communicative english: A battle of instructional designs. International Journal of Innovation, Creativity and Change, 7(7), 29–39.

Risdianto, E. (2019a). Development of Blended Learning Based on Web and Augmented Reality. 1st International Conference on Educational Sciences and Teacher Profession (ICETeP 2018), 295, 144–147.

Risdianto, E. (2019b). Kepemimpinan Dalam Dunia Pendidikan Di Indonesia di Era Revolusi Industri 4.0. 1–12.

Risdianto, E., Darmawan, A., Kristiawan, M., Wachidi, & Riyanto. (2020). Rasch Model Analysis On The Feasibility Test Of Basic Physics Ii Practical Guide Using Augmented Reality. ARPN Journal of Engineering and Applied Sciences, 15(4), 482–490.

Sabri, I. (2019). Peran Pendidikan Seni Di Era Society 5 . 0 untuk Revolusi Industri 4.0. Prosiding Seminar Nasional Pascasarjana UNNES, 2(1), 342–347.

Siahaan, A. D., Medriati, R., & Risdianto, E. (2019). Pengembangan Penuntun Praktikum Fisika Dasar Ii Menggunakan Teknologi Augmented Reality Pada Materi Rangkaian Listrik Dan Optik Geometris. Jurnal Kumparan Fisika, 2(2), 91–98. https://doi.org/10.33369/jkf.2.2.91-98

Sukarno, M. (2020). Penguatan Pendidikan Karakter dalam Era Masyarakat 5.0. Prosiding Seminar Nasional 2020 Fakultas Psikologi Umby, 32–37.

Sumintono, B. dan W. (2015). Aplikasi Permodelan Rasch pada Assessment Pendidikan. (B. Trim, ed.). cimahi: Trim Komunikata.

Suryadi. (2020). Pembelajaran Era Disruptif Menuju Masyarakat 5.0 (Sebuah Telaah Perspektif Manajemen Pendidikan). Prosiding Seminar Nasional Pendidikan Program Pascasarjana Universitas PGRI Palembang 10 Januari 2020, 16–29.

Untary, Helverasari; Risdianto, E. dan K. (2020). Analisis Data Penelitian dengan Model Rasch dan Winstep. Bengkulu: Halaman Moeka.

Usman, U. (2018). Komunikasi Pendidikan Berbasis Blended Learning Dalam Membentuk Kemandirian Belajar. Jurnal Jurnalisa, 4(1), 136–150. https://doi.org/10.24252/jurnalisa.v4i1.5626

Wahyuningsih, S. A. (2020). Penggunaan Model Rasch Untuk Analisis Instrumen the Use of Rasch Model for Analyzing Test. Jurnal Pendidikan Matematika, 3(1), 45–50.

Wardani, D. N., Toenlioe, A. J. E., & Wedi, A. (2018). Daya Tarik Pembelajaran Di Era 21 Dengan Blended Learning. Jurnal Kajian Teknologi Pendidikan (JKTP), 1(1), 13–18.

Downloads

Published

2021-05-04

How to Cite

Risdianto, E., Wachidi, W., Riyanto, R., Alexon, A., Fathurrochman, I., & Kusen, K. (2021). Blended Learning Model Based on Massive Open Online Courses (MOOCs) Assisted by Augmented Reality (BMA) Model as the Electronic Learning Media in the Pandemic Covid-19. AL-ISHLAH: Jurnal Pendidikan, 13(1), 228–241. https://doi.org/10.35445/alishlah.v13i1.470

Issue

Vol. 13 No. 1 (2021): AL-ISHLAH: JURNAL PENDIDIKAN

Section

Articles

Citation Check

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.